Lansinoh Single Electric Breast Pump

Advanced technologies to help you express your milk and ensure you can continue to provide nourishing breastmilk for times when you can't directly feed from the breast.
Designed with your comfort in mind, the Lansinoh Single Electric Breast Pump has six effective suction levels so you can pump easily. Lightweight and portable you can plug it in or use batteries to operate, making it suitable for use at home or outdoors.

With two different phases that simulates your baby's natural sucking pattern to help maximise milk production efficiency. The 'let down' phase has a rapid suction to stimulate and initiate milk flow. In the 'expression phase' it provides a slower, deeper suction to maximise flow. The system also features an LED light up display, allowing you to express in low light conditions.
Brand Lansinoh
Condition New
MPN 81276
GTIN 5060062990164
Box contains: 1 x Lansinoh Single Electric Breastpump. 2 phase technology and 6 adjustable suction levels. Includes compatible Lansinoh Wideneck Feeding Bottle and NaturalWave teat.

Power: mains or battery operated. 
The pump can work with either the AC Adaptor (included) or with 6 AA batteries (not included). The pump will run for approximately 2 hours with 6 AA alkaline batteries. We recommend using alkaline batteries instead of rechargeable batteries. Do not mix old and new batteries; replace as a simultaneous set. If batteries are in the pump while the AC adaptor is in use, the AC adaptor will power the pump. For the most economical use, we recommend using the pump with the AC adaptor whenever possible.
  • Lansinoh Single Electric Breast Pump base unit
  • Tubing 800mm
  • Pump Connector
  • Breast Cone (standard)
  • ComfortFit Silicone Breast Cushion (standard)
  • Breast Cushion Body
  • Diaphragm
  • Diaphragm Cap
  • White Valve (1 extra)
  • 160ml Feeding Bottle (1)
  • Container Ring (1) and Sealing Disk (1)
  • Ac Adapter/Power Cord
  • Bottle Holder (1)
All parts are dishwasher safe  (except the Tubing, Y connector, White Pump Connector and motor). However, we recommend gently hand washing the white valves as they are delicate and will prevent the pump from working if damaged or torn.
Note: Tubing and Tubing Y connector, White Pump Connector and motor should not be washed or sterilised. The tubing does not need to be washed because the milk does not come into contact with the tubing.  If you do accidentally wash the tubing, disconnect the tubing from the diaphragm cap, leaving it connected to the motor only and run the pump for a few minutes to see if the air from the base eliminates any condensation that may be inside. If you notice any remaining condensation or anything that may be mould, discard the tubing and purchase another set.
All parts can be steam sterilised in a microwave bag according to the manufacturers directions (except Tubing and Tubing Y connector, White Pump Connector, motor and breast cushions).
Use the appropriate amount of water according to the directions on your steam steriliser so the parts do not get overheated and/or melt. Note that all pump parts must be completely dry prior to use or performance may be affected.
  • BPA and BPS free plastic material
  • light and portable - use at home or outdoors
  • 2 phase expression to stimulate natural milk flow
  • 6 suction levels with easy to use control buttons
  • simple to clean, assemble and use
  • secure seal and comfortable fit